Configuring Switch Software; Configuring Vlan; Configuring Untag Vlan; Configuring Tag Vlan - Fujitsu PRIMERGY BX900 User Manual

3. Configuring Switch Software

This chapter describes how to configure switch software functions.

3.1 Configuring VLAN

3.1.1 Configuring untag VLAN

This section describes how to configure untag VLAN.
<Configuration target>
Assign Interface0/1 to untag VLAN(VID10)
Assign Interface0/5 to untag VLAN(VID20)
Assign IP address(192.168.20.1/24) VLAN(VID20).
<Commands>
(config)#interface 0/1
(config-if)#vlan untag 10
(config)#interface 0/5
(config-if)#vlan untag 20
Assign IP address(192.168.20.1/24) to VLAN(VID20)
(config)#lan 0 ip address 192.168.20.1/24 3
(config)#lan 0 vlan20
Save the configuration
(config)#save

3.1.2 Configuring tag VLAN

This section describes how to configure tag VLAN.
<Configuration target>
Assign Interface0/1 to tag VLAN(VID10)
Assign Interface0/5 to tag VLAN(VID20)
Assign VLAN(VID20) to IP address(192.168.20.1/24)
<Commands>
(config)#interface 0/1
(config-if)#vlan tag 10,20
(config)#interface 0/5
(config-if)#vlan tag 10,20
Assign IP address(192.168.20.1/24) to VLAN(VID20)
(config)#lan 0 ip address 192.168.20.1/24 3
(config)#lan 0 vlan20
Save the configuration
(config)#save
PRIMERGY 10GbE Connection Blade 18/8 User Guide
22 / 95