Configuring Static Mac Forwarding - Fujitsu PRIMERGY BX900 User Manual

3.5 Configuring Static MAC forwarding

This Section describes how to add MAC address to FDB as static entries.
MAC address can be manually entered in FDB which doesn't age out and you can avoid
flooding of extra frames to network.
Server#1
<Configuration target>
Assign Interface0/2, 0/5 which Server#1,#2 are connected to VLAN(VID10).
Assign Interface0/10 which Server#3 is connected to VLAN(VID20).
Add MAC address of Servers to FDB as static entry.
Server#1 MAC address: 00:00:00:00:00:11
Server#2 MAC address: 00:00:00:00:00:22
Server#2 MAC address: 00:00:00:00:00:33
<Commands>
Assign Interface0/2 and 0/5 to untag VLAN(VID10)
(config)#interface range 0/2,0/5
(config-if)#vlan untag 10
Assign Interface0/10 to untag VLAN(VID20)
(config)#interface 0/10
(config-if)#vlan untag 20
Add MAC address to FDB in VLAN10.
(config)#vlan 10 forward 0 00:00:00:00:00:11 2
(config)#vlan 10 forward 1 00:00:00:00:00:22 5
Add MAC address to FDB in VLAN20.
(config)#vlan 20 forward 0 00:00:00:00:00:33 10
Save the configuration
(config)#save
Server#2
VLAN10
PRIMERGY 10GbE Connection Blade 18/8 User Guide
Server#3
VLAN20
32 / 95