Ip Precedence Value Rewrite; Change Queue Of Packets In Vlan - Fujitsu PRIMERGY BX900 User Manual

PRIMERGY 10GbE Connection Blade 18/8 User Guide

IP Precedence value rewrite

This section describes how to configure IP precedence value rewrite which rewrites IP precedence value
of packets which has the specified CoS value in the specified port in VLAN.
<Rewrite request>
VLAN 10 consists of interface0/1-0/8 and they are tag VLAN.
IP precedence value of packets which have CoS value 5 is rewrite to 40 in VLAN10.
<Commands>
Configure ACL which specifies packets of VLAN ID10 and CoS value 5 ---(1)
(config)#acl 150 vlan 10 5
Configure QoS ACL map which rewrites ip precedence value of packets specified by (1) to 6 in
interface0/1-0/8 in VLAN10.
(config)#interface range 0/1-0/8
(config-if)#qos aclmap 0 tos 6 150
Save the configuration
(config)#save

Change queue of packets in VLAN

received
This section describes how to configure change queue function which changes queue which the
packets in ingress port use in egress port.
<Rewrite request>
VLAN20 consists of interface0/1-0/5 and 0/1-0/4 is tag VLAN. 0/5 is untag VLAN.
Queue of packets of source Mac address 00:0b:01:02:03:04 is changed to 3.
<Commands>
Configure ACL which specifies source MAC address 00:0b:01:02:03:04 ---(1)
(config)#acl 100 mac 00:0b:01:02:03:04 any any
Configure QoS ACL map which changes queue of packets specified by(1) in VLAN20.
(config)#vlan 20 qos aclmap 0 queue 3 100
Save the configuration
(config)#save
35 / 95