Sfp+ Based Ports; Leds (B, C, D, E) - Fujitsu PRIMERGY BX900 User Manual

1.1.2 SFP+ based ports

The PRIMERGY 10GbE Connection Blade 18/8 has 8 SFP+ based ports in front panel the port number is
assigned from 19 to 26. (The downlink port numbers are assigned from 1 to 18 corresponding with
server blade slots number)
Please refer to Data Sheet for modules and cables supported.

1.1.3 LEDs (B, C, D, E)

The PRIMERGY 10GbE Connection Blade 18/8 has 5 kinds of LED indicating Connection Blade status, port
status and activity and stacking status.
LED
B ID
C Stack LED
D Status LED
E Port LED
Color
Solid Blue
Off
Not Used
Solid Green
Blinking
Alternately
Green/Amber
Off
ERR Solid Amber
(LEFT)
Blinking Amber
Off
LINK Solid Green
(Right)
Blinking Green
Off
Table2. LEDs in front panel
PRIMERGY 10GbE Connection Blade 18/8 User Guide
Meaning
Identified by MMB
Not identified by MMB
Normal
Connection Blade Failure
Power off
SFP+ module error
SFP+ module not supported
No SFP+ module error
or SFP+ not installed
Link established
Transmitting the data on the port
No link
6 / 95