Configuring Ieee802.1X Authentication - Fujitsu PRIMERGY BX900 User Manual

3.9 Configuring IEEE802.1X Authentication

This section describes how to configure IEEE802.1X authentication.
Note
Don't assign VLAN ID to ports which use IEEE802.1X authentication.
Configure AAA group ID correctly for IEEE802.1X authentication.
Only EAP-MD5 can be used as authentication method for local authentication.
The following accounting information can not be gotten correctly in multiple authentication environment
per one physical port
- The number of Tx packet
- The number of Rx packet
- The number of Tx byte
- The number of Rx byte
VLAN10
Supplicant#1 Supplicant#2
0/1 0/2
0/19
VLAN11
PRIMERGY 10GbE Connection Blade 18/8 User Guide
Supplicant#3
0/3
0/22
VLAN123
RADIUS Server
VLAN100
172.16.1.100
43 / 95
0/26