2.8 Configuration files
The PRIMERGY 10GbE Connection Blade 18/8 has 2 configuration files for each EHM configuration,
switch mode configuration and IBP mode configuration.
EHM
config1
config2
Configuration file1
for EHM
Configuration file2
for EHM
構成定義情報 2
2.8.1 Changing startup configuration file
You can change startup configuration file with the following command.
(Changing startup configuration from config1 to config2)
#reset config2
2.8.2 Checking configuration file
You can check the running configuration with show runnig-config command
#show running-config
You can check the startup-configuration with show startup-config command
#show startup-config
2.8.3 Saving configuration
You can save the current running configuration in startup configuration with save command.
(config)#save
You can save the current running configuration in config2 with the following command.
(config)#save config2
? free choice of naming?
? how can I see which config file name is startup ?
PRIMERGY 10GbE Connection Blade 18/8
Switch Mode
config1
config2
Configuration file1
for Switch Mode
Figure7 Configuration file structure
No. Name is config1 or config2
18 / 95
PRIMERGY 10GbE Connection Blade 18/8 User Guide
IBP Mode
config1
Configuration file2
for Switch Mode
構成定義情報 2
config2
Configuration file1
for IBP software
Configuration file2
for IBP software