Configuring Port Mirroring - Fujitsu PRIMERGY BX900 User Manual

3.11 Configuring Port Mirroring

This section describes how to configure port mirroring function.
You can monitor the Rx/Tx traffic of source port in the target port by using port mirroring function.
This section explains how to configure source port to interfce0/17 and target port to interface 0/26 and
mirror Rx traffic of source port to target port.
<Configuration target>
Configure interface0/17 to source port(Rx)
Configure interface0/26 to target port.
<Commands>
Configure interface0/17 to mirror port.
(config)#interface 0/17
(config-if)#type mirror 0 26 rx
Save the configuration
(config)#save
PRIMERGY 10GbE Connection Blade 18/8 User Guide
Source
Port
Analyzer
49 / 95
Target
Port