Configuring Protocol Vlan - Fujitsu PRIMERGY BX900 User Manual

3.1.3 Configuring protocol VLAN

This section describes how to configure protocol VLAN which IP protocol packets are
sent/received with VLAN10 and VLAN20. Packets except IP protocol are sent/received with
VLAN100.
<Configuration target>
Assign Interface0/1 to untag VLAN(VID10,100)
Assign Interface0/5 to untag VLAN(VID20,100)
Assign VLAN10,20 to IPv4 Protocol VLAN
Assign IP address(192.168.20.1/24) to VLAN(VID20)
<Commands>
(config)#interface 0/1
(config-if)#vlan untag 10,100
(config)#interface 0/5
(config-if)#vlan untag 20,100
(config)#vlan 10 protocol ipv4
(config)#vlan 20 protocol ipv4
(config)#lan 0 ip address 192.168.20.1/24 3
(config)#lan 0 vlan20
Save the configuration
(config)#save
PRIMERGY 10GbE Connection Blade 18/8 User Guide
23 / 95