2.8.4 Backup/Restore configuration
You can backup/restore configuration file in/from a remote console with ftp command
Backup configuration
Get configuration with
ftp command
FTP Client
192.168.1.100/24
Restore configuration
Put configuration with
ftp command
Backup Configuration
Example) backup config1 in C:<config of FTP client with file name "config1-1"
C:<config>ftp 192.168.1.10
User (192.168.1.100:(none)): admin
331 Password required for admin.
Password:
230 User admin logged in.
ftp> bin
200 Type set to I
ftp>get config1 config1-1
・
・
ftp>bye
221 Goodbye
C:<config>
PRIMERGY 10GbE Connection Blade 18/8 User Guide
Figure8 Backup/Restore Configuration
Connect with FTP to Connection Blade
Enter User Name
Enter Password
Change to binary mode
backup config1 to config1-1 file
19 / 95
oob port
192.168.1.10/24