Specifying Scsi Parameters; Using The Scsi Setup Utility - HP Integrity rx2620 User's & Service Manual

Shell> sysmode admin
You are now in admin mode.
Shell> sysmode service
You are now in service mode.
Shell> sysmode normal
You are now in normal mode.

Specifying SCSI Parameters

The following SCSI parameters can be configured for the SCSI board:
SCSI ID (SCSI initiator ID)
Maximum data transfer rate (SCSI rate)
Bus width
Whether the HBA is bootable (driver support)
Avoid bus resets (secondary cluster server)

Using the SCSI Setup Utility

To use the SCSI Setup Utility to specify SCSI parameters:
1. To map the parameters for all PCI cards installed in the server, enter the shell>
info io command at the EFI Shell prompt.
A list of all the installed devices in the server and managed by EFI drivers appears.
For example:
I/O INFORMATION
BOOTABLE DEVICES
Order
-----
1
Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)/CDROM(Entry0)
Seg
#
---
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
System Wake-On-LAN: Enabled
In this example, a single SCSI interface is listed.
Media Type Path
---------- ---------------------------------------
CDROM
Bus Dev Fnc Vendor
# # # ID
--- --- --- ------
00 01 00 0x1033
00 01 01 0x1033
00 01 02 0x1033
00 02 00 0x1095
20 01 00 0x1000
20 01 01 0x1000
20 02 00 0x8086
20 02 01 0x8086
40 01 00 0x1000
60 01 00 0x1077
60 01 01 0x1077
80 01 00 0x1000
80 01 01 0x1000
C0 01 00 0x1000
E0 01 00 0x103C
E0 01 01 0x103C
E0 02 00 0x1002
Device Slot
ID # Path
------ --- -----------
0x0035 XX Acpi(HWP0002,0)/Pci(1|0)
0x0035 XX Acpi(HWP0002,0)/Pci(1|1)
0x00E0 XX Acpi(HWP0002,0)/Pci(1|2)
0x0649 XX Acpi(HWP0002,0)/Pci(2|0)
0x0030 XX Acpi(HWP0002,100)/Pci(1|0)
0x0030 XX Acpi(HWP0002,100)/Pci(1|1)
0x1079 XX Acpi(HWP0002,100)/Pci(2|0)
0x1079 XX Acpi(HWP0002,100)/Pci(2|1)
0x0021 03 Acpi(HWP0002,200)/Pci(1|0)
0x2312 02 Acpi(HWP0002,300)/Pci(1|0)
0x2312 02 Acpi(HWP0002,300)/Pci(1|1)
0x000F 01 Acpi(HWP0002,400)/Pci(1|0)
0x000F 01 Acpi(HWP0002,400)/Pci(1|1)
0x0021 04 Acpi(HWP0002,600)/Pci(1|0)
0x1290 XX Acpi(HWP0002,700)/Pci(1|0)
0x1048 XX Acpi(HWP0002,700)/Pci(1|1)
0x5159 XX Acpi(HWP0002,700)/Pci(2|0)
153