Set-Up Of Various Measurement Display, Special Type Display - Mitsubishi Electric ME96NSR Operator's Manual

■ Set-up Menu 4 (Set-up of Various Measurement Display, Special Type Display)
In the operation mode, press
SET
Set the set-up menu number to "4".
+ , –
Set-up menu
DISPLAY SET
① Set the combination of display for active energy and reactive energy.
Combination of imported/exported and lag/lead can be selected. Combination
+ –
,
Combination
① Expanded counting
DISPLAY SET
② Set the harmonic measurement.
+ – on : Harmonic measurement value is displayed.
,
② Harmonics
oFF : Harmonic measurement value is not displayed.
DISPLAY SET
+ –
,
③ Digital input/output
④ Set the back light auto off (Auto) / continuous on (HoLd).
DISPLAY SET
(Setting this is usually unnecessary.)
④ Back light
+ –
,
ON/OFF setting
If you set to 'Auto off', the back light turns off when there is no key operation for 5
minutes. When the operation key is pressed, it is lit for 5 minutes. At this moment,
the display is not changed.
DISPLAY SET
When the operation key is pressed once again, the display is changed.
+ –
,
⑤ Current display digit
⑥ Set the voltage display digit.
DISPLAY SET
+ –
,
⑥ Voltage display digit
8888: 4 digits
DISPLAY SET
+ , –
⑦
Active power display digit
⑧ Set the reactive power display digit.
DISPLAY SET
+ –
,
⑧ Reactive power display digit
8888: 4 digits
DISPLAY SET
+ –
,
⑨ Apparent power display digit
SET
According to the set-up diagram (page 6), save the
changed contents or continue to the other set-up menu.
+ , –
Set-up menu
Note
In No.⑤ to No.⑨, the measurement elements that are not included in the display pattern setting are skipped.
and simultaneously for 2 seconds or more, and the following operation becomes available.
RESET
Active energy Reactive energy
(Wh) (varh)
Imported (Exported) Imported (Exported) Imported
Imported Exported
lag (lead) lead (lag) lag
1
2
3
4
HoLd Auto
(Continuous ON) (Auto OFF)
888: 3 digits
888: 3 digits
1
in the diagram is for standard use.
Exported
lead lag lead
Display of combination1 Display of combination2 Display of combination3 Display of combination4
③ Set the display of the digital input/output state.
When the ME-0052-NS96 or ME-0040C-NR96
type option module is not installed, this menu is
not displayed.
on : The state of the digital input/output is displayed.
oFF : The state of the digital input/output is not displayed.
⑤ Set the current display digit.
888: 3 digits
8888: 4 digits
⑦ Set the active power display digit.
888: 3 digits
8888: 4 digits
⑨ Set the apparent power display digit.
888: 3 digits
8888: 4 digits
9