Overview; Table 2-1: Configuration Task Sequence - Honeywell NetAXS-123 User Manual

Configuring via the Web Server

Overview

2.1 Overview
This chapter explains the NetAXS-123 configuration functions as accessed via the
web server. These functions should be performed only by the system administrator or
service personnel.
Caution:
follow the sequence described in
configured.

Table 2-1: Configuration Task Sequence

To perform this task...
1. Configure the panel:
Host/Loop Communications
Network
General
Site Codes
2. Configure the time zones.
3. Configure the doors:
Readers
Outputs
Inputs
4. Configure the access levels.
16 www.honeywell.com
The sequence of NetAXS-123 configuration tasks is critical. If you do not
Table 2-1, the system cannot be successfully
Click this heading