C (Card Add) Command - Honeywell NetAXS-123 User Manual

3.8.4 C (Card Add) Command

_C=pn_code_time zone_dev<CR>
Variables:
pn = panel number (1-31)
code = card number (range depends on card format)
time zone = time zone number the card will follow (1-255)
dev = device numbers card will work with, as follows:
1 = card reader #1
2 = card reader #2
3 = card reader #3
Example #1:
_C=6_12345_10_1_2_3<CR>
This command would configure panel 6 to add a card entry of 12345 to the panels
database, that will be valid on readers 1, 2, and 3 during the times and days specified
by time zone 10.
Example #2:
_C=18_52989_120_1_3<CR>
This command would configure panel 18 to add a card entry of 52989 to the panels
database, that will be valid on readers 1 and 3 during the times and days specified by
time zone 120.
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
Using WIN-PAK with NetAXS-123
Standalone Commands
99