Monitoring Inputs; Figure 4-5: Monitoring > Inputs - Honeywell NetAXS-123 User Manual

Monitoring NetAXS-123 Status

Monitoring Inputs

4.4 Monitoring Inputs

The panel supports door, panel, and auxiliary inputs. The door inputs provide egress,
status, and tamper monitoring. The panel inputs provide power fail and tamper status.
The auxiliary inputs support any monitoring devices connected.
The Input Status screen enables you to:
• View the current status of each input (Normal, Alarm, Cut, Short, Shunted).
• Shunt or un-shunt any input. When an input is shunted, its change of state is
• Restore the input to its time zone. A time zone is a specified time period during
Click
Monitoring > Inputs
Figure 4-5: Monitoring > Inputs
To shunt or un-shunt an input
1. Click the input name to display a prompt.
112 www.honeywell.com
ignored. This way you can allow a door to be held open without falsely
signalling an alarm. The default state of an input point is "un-shunted."
which the input will be shunted and the alarm de-activated (see
Time Management, page
to display the Input Status screen:
:
29).
Configuring