Honeywell NetAXS-123 User Manual page 42

Configuring via the Web Server
Configuring Time Management
To modify a time zone
1. In the Tz column, click the number of the time zone you want to modify.
2. Change the time zone settings as you desire.
3. Click
To delete a time zone
Caution:
1. In the Tz column, click the number of the time zone you want to delete.
2. Click
3. Click
Linking Time Zones
You assign each Time Zone a specific start time and end time. The maximum time
range is from 12:00 AM to 11:59 PM. Note that the time range cannot cross midnight.
You can set this time range to be effective for any day of the week, including
weekends (Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and Sunday).
These days can also include holidays, which are considered special days that take
precedence over a standard day. Also, since Access Levels, Outputs, and Inputs can
only be given one Time Zone selection at a time, you can link Time Zones together to
create bigger time zones that could not fit into a single Time Zone.
For example, suppose you must create a Cleaning Crew Time Zone. The time zone(s)
are to be set up as follows: Monday-Friday 5 PM -1 AM, Saturday and Sunday 8
AM-1 PM, no holidays. This becomes three separate time zones, as follows.
Time Zone Number
Time Zone 1 is reserved as a default with a time range of 24 hours, seven days a
Note:
week.
32 www.honeywell.com
:
to accept the changes.
Modify
:
Do not delete a time zone that is currently in use.
.
Delete
at the delete prompt.
OK
Time Range
2 Monday-Friday, 5 PM -11:59 PM
(Remember, the time range cannot cross
midnight, so 11:59 PM is the limit.)
3 Tuesday-Saturday, 12:00 AM-1:00 AM.
4 Saturday-Sunday, 8:00 AM-1:00 PM.