To restore (or download) firmware automatically at a later date:
1. Click
2. Click
3. Click
:
4. Enter the specific date and time information.
5. Click
6. Click
To download a card database report (.CSV file) from the host system to the panel:
1. Click
2. Click
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
to locate the firmware file.
Browse
.
Deferred
. Time and date list boxes appear.
Automatic
Figure 5-3: File Management Automatic Time Setting
. The download status is shown as "Activation scheduled for
Download
[month/day], [hr:min] [AM/PM]" .
Activation Scheduled for <MONTH/TIME>
your files.
Every panel has its own database, and each panel's database must be
Note:
backed up individually. For more information, see
Firmware, page
129.
to locate the .CSV file.
Browse
to download the file. If the file is in the correct report format,
Download
this message appears: "Would you like to append or replace the database?
Access Control does not function while replacing a database, and updating
may take several minutes." If the file is not in the correct report format, a
message states the error condition.
If the database update is successful, this message appears: "Update Successful.
Restarting Access Control." If the database update is not successful, a message
states the error condition.
File Management
Backing up and Restoring the NetAXS-123
when you are ready to download
Upgrading NetAXS-123
123