Table 3-2: Factory Default Configuration Settings For Door 2 - Honeywell NetAXS-123 User Manual

Table 3-2
should be used for the readers, inputs, and outputs when either a 1- or 2-door I/O
board is attached to the board-to-board connector on the controller board.

Table 3-2: Factory Default Configuration Settings for Door 2

Type
Input
Output
a. Reader B is not available in WIN-PAK.
b. This output may not be controlled from WIN-PAK. However, you may config-
ure custom commands to control it.
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
lists the factory I/O board default settings for Door #2. These mappings
Purpose
Egress
Status
Reader Tamper
Lock Relay
Reader LED
Aux Relay
Reader Buzzer
Using WIN-PAK with NetAXS-123
Logical Number
Reader A
Reader B
9
9
10 10
11 12
7 7
8 8
b b
10 10
Configuration Guidelines
Other
a
b
9
75