Configuring via the Web Server
Configuring the Doors
2.4.2 Reader B Tab
When Reader B is activated, Reader A and Reader B may be multiplexed to the same
reader port. Multiplexed readers must support hold lines and be wired according to
guidelines in the Installation Guide. The multiplexed reader configuration supports
readers on opposite sides of the same door, and the readers must be assigned the same
Egress and Status Inputs (if configured). Multiplexed readers may also be assigned the
same door lock.
On the Reader A tab, click the
Figure 2-12: Configuration > Doors: > 1 > Reader B Tab
Click
Activate Reader B
Figure 2-13: Reader B Activation In-Progress Message
46
www.honeywell.com
tab to display the Reader B tab.
Reader B
to display the following "activation in-progress" screen: