General Setup; Win-Pak Screen Shots For Door 1; Figure 3-1: Reader Setup For Door 1 - Honeywell NetAXS-123 User Manual

3.4.2 General Setup

To set up WIN-PAK to control a NetAXS-123 panel, first configure Loop and Panel
objects. See
performed these steps, you may configure the NetAXS-123 Doors as described below.

3.5 WIN-PAK Screen Shots for Door 1

The following screen shots illustrate setting up Reader, Egress Input, Status Input,
Lock Output and LED Output for Door 1.
Click the Readers tab to configure the reader setup parameters.

Figure 3-1: Reader Setup for Door 1

NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
Configuring the System,
Using WIN-PAK with NetAXS-123
WIN-PAK Screen Shots for Door 1
page 18 for detailed procedures. Once you have
81