Honeywell NetAXS-123 User Manual page 45

Each Holiday added is considered a full day, extending from midnight to midnight.
The options available when configuring a holiday are Annual, Type, Date and Year.
While Annual is enabled, the date added as a Holiday will be a Holiday every year.
This disables the Annual check box and allows a user to select a specific year, so that
only during that date and year will the Holiday selection work.
While Annual is selected, the Year box is grayed out. The panel can support three
different Holiday Types (Type 1, Type 2, and Type 3), but a user can only select one
type per day. Also, note that a single calendar day cannot be set for more than one type
of Holiday. For example, the 4
and 3 would not be able to work on the 4
require multiple days will require a Holiday entry for each date that is to be special.
For example, Thanksgiving is usually two days, Thursday and Friday. Both of these
days would require a separate Holiday date entry and use the same Holiday Type.
Beyond that, Type 1, 2, and 3 can be configured any way you wish.
To modify a holiday
1. In the Holiday column, click the number of the holiday you want to modify.
2. Change the holiday settings as you desire.
3. Click
To delete a holiday
1. In the Holiday column, click the number of the holiday you want to delete.
2. Click
3. Click
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
th
of July could be a Type 1 Holiday, but then Type 2
:
to accept the changes.
Modify
:
.
Delete
at the delete prompt.
OK
Configuring via the Web Server
Configuring Time Management
th
of July. Holidays or special events that
35