Configuring The Doors; Reader A Tab; Figure 2-9: Configuration > Doors: > 1 > Reader A Tab - Honeywell NetAXS-123 User Manual

Configuring via the Web Server

Configuring the Doors

2.4 Configuring the Doors
Each panel supports from 1-3 doors. For each door, you must configure the readers,
inputs, and outputs.
Click
Configuration > Doors: 1
Figure 2-9: Configuration > Doors: > 1 > Reader A Tab
Follow the same procedures described below to set up doors 2 and 3 if your setup
includes them.

2.4.1 Reader A Tab

A reader is a device that reads cards and sends the card data to the panel. The
NetAXS-123 supports two readers per door. Reader B may be activated and
de-activated by the user.
The Reader A tab enables you to:
• Name the Reader.
• Define a time zone during which the reader will follow one or more of the
• Further define the Card Only, PIN Only, Card and PIN, and Card or PIN access
36 www.honeywell.com
to display the Door Configuration screen for door 1.
access modes below:
– Disabled
– Lockdown
– Card and PIN
– Card or Pin
– PIN Only
– Card Only
modes