D (Date) Command - Honeywell NetAXS-123 User Manual

3.8.2 D (Date) Command

_D=pn_mm/dd/yyyy_day<CR>
Variables:
pn = panel number (1-31)
mm = month number (1-12)
dd = day number (1-31)
yyyy = year number (ex 2007, 1999, etc.)
date = day of week (1-7):
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
The day of week setting is a hold-over from an old command. The panel using
Note:
the mm/dd/yyyy information will automatically configure panel to the correct day of
the week, regardless of the setting selected in day of week. But the command still
requires a value to be entered in its place of 1-7.
Example #1:
_D=1_01/09/2007_5<CR>
This command would set panel 1 to a date of 1/9/2007 and to Friday as the day of the
week.
Example #2:
_D=25_12/14/2009_7<CR>
This command would set panel 25 to a date of 12/14/2009 and to Sunday as the day of
the week.
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
Using WIN-PAK with NetAXS-123
Standalone Commands
97