Share Content Using An Airplay-Certified Device; Share Content Using An Hdmi Connection - Polycom Pano User Manual

2. Select the name of the Pano device shown on the home screen.
3. If prompted, enter the security code shown on the Pano device home screen.

Share Content Using an AirPlay-Certified Device

You can share your screen and audio with an AirPlay-certified device, such as an iPhone
®
Mac computer, to a Pano device.
Remember the following when sharing content using an AirPlay-certified device:
▪ You control the audio with the volume controls on your device.
▪ Your device must be connected to the same network as the Pano system.
▪ The Pano device uses the orientation and aspect ratios of your device. The resolution of some
devices may require the Pano device to display content that does not fill the whole screen.
Procedure
1. On your AirPlay-certified device, access the Pano device.
Check your device documentation for specific instructions.
2. Select the name of the Pano device shown on the home screen.
3. If prompted, enter the security code shown on the Pano device home screen.

Share Content Using an HDMI Connection

You can share content from a personal device that is directly connected to the Pano device using an
HDMI cable.
Remember the following when sharing your device using an HDMI connection:
▪ Content from your device starts sharing with the Pano device as soon as the HDMI cable is
connected.
▪ You can adjust the audio using the volume controls on the Pano device monitor or on your device.
▪ Your device video output must support the following resolutions and frame rates.
Supported HDMI Resolutions and Frame Rates
Input
UHD
OHD
FHD
WSXGA+
UXGA
SXGA
HD
Polycom, Inc.
Resolution
3840×2160p
2560×1440p
1920×1080p
1680×1050
1600×1200
1280×1024
1280×720
Sharing Content
® ®
, iPad
Maximum Frame Rate(s)
30
60
60
60
60
60
60
, or
8