Figure 18: Rack Rail Kit Parts - Mellanox Technologies SwitchX-2 User Manual

Rev 1.1
1. Place the ESD mat on the floor where you will be working and put on the ESD strap. Make
sure the ESD strap is touching your skin and that the other end is connected to a verified
ground.
2. Choose which side of the switch you want even with the rack vertical support. Either the side
with the power supply units or the side with the QSFP connectors can be even with one of the
vertical rack supports.
30 Mellanox Technologies

Figure 18: Rack Rail Kit Parts

Switch slide x2
Rail x2
Rail slide x2
Installation