Rev 1.1
3. Decide which mounting option you want to use.
4. Screw the switch slides onto the switch. Use 5 flat head screws for short switches and 7
screws for standard depth switches, to connect each switch slide.
32
Mellanox Technologies
Figure 20: Mounting Options
Figure 21: Screwing on the Rail
5 screws per side are needed for the short switch.
5 screws per side are needed for the short switch.
7 screws per side are needed for the standard switch.
7 screws per side are needed for the standard switch.
There are 16 screws in the kit; you will have left over screws.
There are 16 screws in the kit; you will have left over screws.
Installation