Table 12: Configuration Wizard Session - Ip Zeroconf Configuration - Mellanox Technologies SwitchX-2 User Manual

60 port ethernet switch system

Hide thumbs Also See for SwitchX-2:

Table of Contents

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual

Rev 1.1

Table 12 - Configuration Wizard Session - IP Zeroconf Configuration

Wizard Session Display - IP Zeroconf Configuration (Example)

Mellanox configuration wizard

Do you want to use the wizard for initial configuration? y

Step 1: Hostname? [switch-112126]

Step 2: Use DHCP on mgmt0 interface? [no]

Step 3: Use zeroconf on mgmt0 interface? [no] yes

Step 4: Default gateway? [192.168.10.1]

Step 5: Primary DNS server?

Step 6: Domain name?

Step 7: Enable IPv6? [yes] yes

Step 8: Enable IPv6 autoconfig (SLAAC) on mgmt0 interface? [no] no

Step 9: Admin password (Enter to leave unchanged)?

You have entered the following information:

1. Hostname: switch-112126

2. Use DHCP on mgmt0 interface: no

3. Use zeroconf on mgmt0 interface: yes

4. Default gateway: 192.168.10.1

5. Primary DNS server:

6. Domain name:

7. Enable IPv6: yes

8. Enable IPv6 autoconfig (SLAAC) on mgmt0 interface: yes

9. Admin password (Enter to leave unchanged): (unchanged)

To change an answer, enter the step number to return to.

Otherwise hit <enter> to save changes and exit.

Choice:

Configuration changes saved.

To return to the wizard from the CLI, enter the "configuration jump-start"

command from configure mode. Launching CLI...

<switch name> [standalone: master] >

Mellanox Technologies

Table of Contents