Mellanox Technologies SwitchX-2 User Manual page 27

SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual
7. Copper Cable Connecting/Disconnecting
8. Rack Mounting and Servicing
9. Equipment Installation
10. Equipment Disposal
11. Local and National Electrical Codes
12. Hazardous Radiation Exposure
Copper cables are heavy and not flexible, as such they should be carefully attached to
or detached from the connectors. Refer to the cable manufacturer for special warnings
and instructions.
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
This equipment should be installed, replaced, or serviced only by trained and qualified
personnel.
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
This equipment should be installed in compliance with local and national electrical
codes.
Caution – Use of controls or adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
CLASS 1 LASER PRODUCT and reference to the most recent laser standards:
IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:2001
Mellanox Technologies
Rev 1.1
27