SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual
3.2.3
Power Supply Status Indicators
The indicator is located to the left of the connectors on the connector side panel.
Mellanox
Each PS unit has a single 2 color LED on the right side of the PS unit, that indicates the internal
status of the unit.
All fans must be operating while the power supply is plugged in.
If the switch shuts down due to over temperature, unplug the switch, wait 5 minutes
and replug in the switch. For more information See "Troubleshooting" on page 52.
Figure 7: Power Status LED Connector Side
These are two color LEDs
Green — OK
Red — Major fault
Off — No power
Figure 8: Power Side Panel
OK
!
PS
UID
RST
Fan status LEDs
OK
!
Fan Units
PS unit 1 status LED
OK
!
Primary Power Supply Unit
Mellanox Technologies
Rev 1.1
OK
!
17