Rev 1.2
Parts included in the rail kit:
• 2 rails
• 2 rail slides
• 2 switch slides
1. Place the ESD mat on the floor where you will be working and put on the ESD strap. Make
sure the ESD strap is touching your skin and that the other end is connected to a verified
ground.
2. Choose which side of the switch you want even with the rack vertical support. Either the side
with the power supply units or the side with the SFP+ connectors can be even with one of the
vertical rack supports.
Things to consider before choosing where to mount the rails and rail slides.
22
Mellanox Technologies
• 16 recessed flat head screws for the standard switch
• 10 caged nuts
• 10 pan head screws M6
Figure 9: Rack Rail Kit Parts
Switch slide
Rail
Rail slide
Installation