Table of Contents
Advertisement
SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual
1
Overview
The SX1024 Ethernet switch family provides the highest-performing fabric solution in a 1U form
factor by delivering up to 1.152 Gb/s of non-blocking throughput to High-Performance Comput-
ing (HPC), high frequency trading and Enterprise Data Centers (EDC), with ultra-low latency. It
has 48 10GbE ports that when connected to 10GbE based servers, provides a unique non-block-
ing solution for Ethernet Data-Centers.
1.1
Features
• Based on Mellanox SwitchX-2
• Supports 48 SFP+ ports of 10 GbE
• Supports 12 QSFP ports of 40 GbE Upgradable with a license to 56 GbE
• 2x 10/100/1000BASE-T RJ-45 Ethernet port
• 1x RS232 RJ-45 Console connector
• 1x USB connector
• 1 + 1 redundant 300W AC/DC hot swappable Power supplies
• 3 + 1 redundant fans ordered in two fan units (Support Air in/out)
• On board Temperature monitoring
• Reset Push button on front panel
• Various status LEDs
• 19" rack mountable chassis, 1U with redundant power supplies and Fan units
1.2
Serial Number and Product Version Information
The serial number and the MAC for the switch are found on the pull out tab below the Mellanox
logo on the right side of the Connector side panel. The MAC for the Management PC is also on
this tab. This MAC is for the mgmt0 management interface (the top Ethernet port). The second
interface mgmt1 has the next consecutive MAC. On this switch the mgmt1 interface is found on
the power side on the left side.
Figure 1: Connector Side View of the Switch
UID
RST
Mellanox Technologies
Rev 1.1
11
Advertisement
Table of Contents
