Table of Contents
Advertisement
Rev 1.1
8
Disassembly of the Switch from the Rack
To disassemble the switch from the rack:
1. Unplug and remove all connectors.
2. Unplug all power cords.
3. Remove the ground wire.
4. Unscrew the 2 center bolts from the side of the switch with the bracket.
5. Slide the switch from the rack.
6. Remove the rail slides from the rack.
7. Remove the ten caged nuts.
8.1
Disposal
Follow the instructions found in the Mellanox Web site at
to disassemble and dispose of the Switch according to the WEEE directive.
This button resets both the CPU of the switch device and the CPU of the management module. It
thereby resets all of the ports by bringing them down and powering them up when the button is
pushed. A quick push of this button performs this reset. When the button is held down for 15 sec-
50
Mellanox Technologies
Support the weight of the switch when you remove the screws so that the switch does
not fall.
According to the WEEE Directive 2002/96/EC, all waste electrical and electronic
equipment (EEE) should be collected separately and not disposed of with regular
household waste.
Dispose of this product and all of its parts in a responsible and environmentally
friendly way.
Press the reset button to reset the main CPU
and the management CPU and to delete the
existing password.
Disassembly of the Switch from the Rack
mellanox.com
for proper instructions
PS
UID
RST
Advertisement
Table of Contents
