Table of Contents
Advertisement
SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual
onds the switch is reset and the password is deleted. You will then be able to enter without a pass-
word and make a new password for the user "admin".
You will need the MLNX-OS® package or Mellanox to update firmware for this switch. The
MLNX-OS® package can be downloaded from:
http://www.mellanox.com.
The Mellanox UFM Management software is also an option to more closely manage your fabric,
switches and nodes.
The switch can be managed either remotely, or Out-of-Band using MLNX-OS.
The SX10XX switches come standard with a management software module for chassis manage-
ment called Mellanox Operating System (MLNX-OS). MLNX-OS® is installed on all based
managed switch systems. MLNX-OS® includes a CLI, chassis management software
8.2
Upgrading Software
Software and firmware updates are available from the Mellanox Support website. Copy the
update to a known location on a Remote server within the user's LAN.
Use the CLI in order to perform software upgrades. For further information please refer to the the
MLNX-OS Software User Manual section Upgrading MLNX-OS® Software.
Be sure to read and follow all of the instructions regarding the updating of the software on your
switch system.
=> Products > Management Software > MLNX-OS.
The Ethernet ports for remote management connect to Ethernet switches. These
switches must be configured to 100M/1G auto-negotiation.
Mellanox Technologies
Rev 1.1
51
Advertisement
Table of Contents
