Table of Contents
Advertisement
SwitchX®-2 60 Port Ethernet Switch System Hardware User Manual
4.2
Installation Kits
There are two Installation kit options. One long and one short. Both the standard and the short
switches can be mounted using the long rail kit.
Table 9 - Installation Kit According to Rack Size
MSX60-BKIT
MSX60-SKIT
4.3
Package Contents
Before you install your new switch, unpack the system and check to make sure that all the parts
have been sent, check this against the parts list below. Check the parts for visible damage that
may have occurred during shipping.
The switch comes packed with the following items:
• 1 X – switch
• 1 X – installation kit
• 1X – power cable one for each PS unit – Type C13-C14
• 1 X – Harness
• HAR000028 – Harness RS232 2M cable – DB9 to RJ-45
• 1 X – SFP+ cable and module removal tool
• 1 X – Quick Start Guide
• 1 X – China RoHS statement
4.4
Mechanical Installation
Tools and Customer Supplied Parts:
• Phillips Screwdrivers #1 and #2
• ESD strap
• ESD mat
For racks from 60cm to 80cm deep either use the standard depth switches with the long rail kit or
the short switches with the long rail kit.
Parts included in the rail kit:
• 2 rails
• 2 rail slides
• 2 switch slides
Kit OPN
If anything is damaged or missing, contact your customer representative immediately.
For customer support go to:
www.mellanox.com
=>Support => Customer Support Portal Login
• 16 recessed flat head screws You will have extras!
• 10 caged nuts
• 10 pan head screws M6
Rack Size
40-60 cm deep
60-80 cm deep
• Grounding screw
• Grounding wire sufficient to reach a valid ground.
Mellanox Technologies
Rev 1.1
29
Advertisement
Table of Contents
