Table of Contents
Advertisement
Rev 1.2
2
Installation Safety Warnings
Warnings in French can be found on page 43. Warnings in German can be found on page 46.
Warnings in Spanish can be found on page 50.
1. Installation Instructions
Read all installation instructions before connecting the equipment to the power source.
2. Over-temperature
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 45°C (113°F). Moreover, to guarantee proper air
flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.
3. Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
4. Double pole / Neutral Fusing
This system has double pole/neutral fusing. Remove all power cords before opening
the cover of this product or touching any internal parts.
5. During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
6. Copper Cable Connecting/Disconnecting
Copper cables are heavy and not flexible, as such they should be carefully attached to
or detached from the connectors. Refer to the cable manufacturer for special warnings/
instructions.
12
Mellanox Technologies
Installation Safety Warnings
Advertisement
Table of Contents
