To Register User (Section) Access Numbers - Konica Minolta bizhub 180 User Manual

7 7.5 Specifying Administrative Settings ("ADMIN. MANAGEMENT" Menu)

To register user (section) access numbers

1
Select the "ADMIN. MANAGEMENT"
menu.
❍ Refer to "To select the "ADMIN.
MANAGEMENT" menu" on
page 7-26.
2
Press the [2] key from the 10-Key Pad to select "COPY TRACK".
3
Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
The "COPY TRACK" appears.
4
Using the and
"ACCESS NO. REG.?", and then
press the [Yes] key.
5
Using the 10-Key Pad, enter the
desired access number for the
account (section), and then press the
[Yes] key.
❍
Enter a 3-digit access number.
❍
If you wish to correct the access
number, press the [No/C] key, and then use the 10-Key Pad to enter the new
number.
Once the access number is registered, a screen appears, allowing you to enter
the next access number to be registered.
7-30
keys, select
bizhub 180