Saving Configuration Data; Restoring The Backup; Restoring The Factory Settings - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Saving configuration data

ì
For Task, select the option Save configuration.
This opens a file selection window where you can specify the file you wish to store
in the backup file.
ì
On your local PC, select a directory where you wish to store the configuration file
and enter a name for the file.
ì
Click Save.
Once the procedure has been completed, the current configuration data will have been
backed up in the specified file. As your file contains all your configuration data, you
should protect it from unauthorised access.

Restoring the backup

ì
For Task, select the option Restore configuration.
ì
In your file system, select the backup file with which you wish to restore the config-
uration.
A window will appear prompting you to confirm the procedure.
ì
Click OK. The configuration will now be updated.

Restoring the factory settings

You can reset the Gigaset SE365 WLAN to the factory settings. You should do this before
making the device available to others or exchanging it through the dealer.
ì
Select the option Reset configuration to factory default settings and click OK.
A window will appear prompting you to confirm the procedure.
Following a reset, the Gigaset SE365 WLAN returns to Repeater operating mode.
.
Please note:
Please bear in mind that when the device is fully reset, all configuration settings will
return to the factory settings. This means that you will have to completely reconfigure
the Gigaset SE365 WLAN. This does not affect firmware loaded at an earlier stage.
Administration
63