Siemens Gigaset SE365 WLAN Operating Instructions Manual page 46

The default setting for access control is disabled. This means that all PCs using the
correct SSID and the correct encryption can log in.
ì
Next to MAC address filter select the option On to activate MAC filtering.
Entering MAC addresses manually
ì
Enter the MAC address of the network adapter. You will find this address on the bot-
tom of the device.
ì
Enter the name of the PC.
ì
Click the Add button to add the entry to the list.
Selecting from the list of logged-in PCs
ì
Select the required PC from the Known wireless clients list. All PCs are displayed
that are currently logged in to the router.
ì
Click the Add button to add the selected PC to the list.
Please remember:
If you activate MAC access control, you must at least enter the PC from which you
are configuring the Gigaset SE365 WLAN. Otherwise, you will no longer be able
to access the user interface and an appropriate error message will be shown.
If, by mistake, you have denied all PCs access to the Gigaset SE365 WLAN, you
have two choices:
u
You can completely reset the Gigaset SE365 WLAN (see page 14).
u
You can connect a PC to the Gigaset SE365 WLAN using one of the LAN con-
nections (by cable). As MAC access control only applies to PCs that are con-
nected "wirelessly", you can use this PC to change the configuration.
ì
To go to the next step, click Next >.
Security Setup Wizard
43