Connecting To A Wired Network (Lan), A Pc, A Games Console Or A Modem; Connecting Wirelessly To A Pc Without Wps - Siemens Gigaset SE365 WLAN Operating Instructions Manual

First Steps

Connecting to a wired network (LAN), a PC, a games console or a modem

If you don't use WPS, we recommend that you first connect the device to a PC using an
Ethernet cable. Depending on use, you will first have to make some settings via the
browser-based configuration program of your Gigaset SE365 WLAN.
ì
Plug one end of the Ethernet cable
into the socket marked LAN on the
Gigaset SE365 WLAN.
ì
Plug the other end of the Ethernet cable
into the device to which you wish to
connect the Gigaset SE365 WLAN.
Depending on the particular applica-
tion, this could be a router, a PC, a
games console or a DSL/cable modem.

Connecting wirelessly to a PC without WPS

A wireless connection is made using a wireless network adapter that must be installed
in your PC.
You define a radio network by assigning all the devices an identical
same encryption.
Assign the SSID of the Gigaset SE365 WLAN to the network adapters. The factory set
SSID is ConnectionPoint. If the correct SSID has been entered in your PC's wireless net-
work adapter, the wireless link will be established automatically. You should then con-
figure encryption on the Gigaset SE365 WLAN and the wireless network adapter.
Please remember:
Before your PC can communicate via the Gigaset SE365 WLAN, you may have to perform
the network configuration on the PC. For information please consult the document
"Configuring the local network" on the product CD.
18
)))
)))
SSID and setting the
(((