Siemens Gigaset SE365 WLAN Operating Instructions Manual page 11

Introduction
Registering a repeater
Access Point
Pushing the registration
button
Registering a PC
Access Point
Pushing the registration
button
This procedure corresponds to the registration mode Push Button (default) on your
Gigaset SE365 WLAN.
Please note that a new SSID and pre-shared key will be generated when the registra-
tion button is pushed for the first time after each factory reset of the Gigaset SE365
WLAN. This means that the clients have to be registered again.
u
Via Personal Identification Number (PIN)
The PIN offers higher security for registration. No other device (e.g. of the neigh-
bour) can log in unnoticed. A PIN is generated on one WLAN device, usually the
access point, which has to be entered on the other devices for registration. If a client
logs on with this PIN, the security data is synchronised.
It is also possible to create the PIN on one of the clients.
Access Point
Generating the PIN via con-
figuration user interface
8
Registering
SSID and pre-shared key
Registering
SSID and pre-shared key
Registering
SSID and pre-shared key
Repeater
Pushing the registration
button within two minutes
WLAN network adapter
Activating WPS regis-
tration via software
Repeater or
WLAN network adapter
Entering and activating the PIN
via configuration user interface