Siemens Gigaset SE365 WLAN Operating Instructions Manual page 88

Table of Contents

Advertisement

Problem
You cannot access
the Gigaset SE365
WLAN from a PC,
for example to call
the configuration
program (wireless
connection via
WLAN).
Possible cause
You are not con-
nected to the Gigaset
SE365 WLAN.
The PC's network set-
tings are wrong.
Your PC is configured
for automatically
obtaining IP
addresses, but the
DHCP server of your
Gigaset SE365 WLAN
has been switched
off.
The IP address of your
Gigaset SE365 WLAN
has changed as you
have activated the
Obtained automati-
cally option (see
page 46).
Remedy
ì
Make sure you are properly
connected to the Gigaset SE365
WLAN. Check the parameters in the
Gigaset WLAN Adapter Monitor.
ì
Make sure that the PC has the right
configuration for connecting to the
Gigaset SE365 WLAN, for example
that the IP address and subnet mask
have been set correctly or the
obtaining the IP address automati-
cally option has been activated.
ì
Manually assign a static IP address
for your PC in your Gigaset SE365
WLAN address block
ì
Check the log of your DHCP server,
from which the Gigaset SE365
WLAN obtained its IP address, to see
which IP address was assigned to it
and enter this address in your
browser. Try resetting your Gigaset
SE365 WLAN to the factory settings
to once again obtain access via
address 192.168.2.254 (see
page 14).
Appendix
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents