Basic Settings For Repeater And Access Point Operating Mode; Settings For The Wireless Network - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Basic Setup Wizard

Basic settings for Repeater and Access point operating mode

Settings for the wireless network

Note:
In Access point operating mode you only need to configure the wireless network if
you are not using the WPS function (1 click only) (see page 7 and page 18).
Your Gigaset SE365 WLAN allows you to roam your network. Roaming provides opti-
mum connection quality and uninterrupted data traffic while you move around within
the range of your network. Your PC automatically sets up a connection to the access
point with the strongest signal without interrupting data traffic. The precondition for
roaming is setting the same radio channel, the same SSID and the same IP subnet on all
the network components.
Please note:
The network adapter of the PC you want to use to configure your Gigaset SE365 WLAN
should be set to obtain its IP address automatically. If you use static IP addresses in
your network, the IP address of your PCs must be in the same subnet as the IP address
of your Gigaset SE365 WLAN. See the document "Configuring the local network" on
the product CD.
26