Access Control Within The Wireless Network - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Security Setup Wizard

Access control within the wireless network

This screen only appears in Repeater or Access point operating mode.
This step allows you to determine which PCs should have wireless access to the
Gigaset SE365 WLAN. Access control is based on the
adapters. You can enter the MAC addresses for the PCs manually or select them from the
list of PCs that are currently logged in.
Notes:
u
The access control setting is only valid for wireless access of PCs to the repeater or
access point. If you use a router in your wireless network and have configured
access control there for PCs, you must also set this access control on the repeater.
u
If you have activated access control via the MAC address filter and you want to use
WPS, please note that only clients that are already included in the MAC address list
can register via WPS.
42
MAC address of the PCs' network