● 1 power supply unit for Gigaset Repeater ● 2 screws and plugs ● These operating instructions ● Maintenance Simply wipe your Gigaset Repeater with a damp cloth or an antistatic wipe. Never use a dry cloth (causes static charge).
Before you start to register the units, install the Gigaset Repeater in close proximity to the base station and a power supply point. If a Gigaset Repeater is already in use, it must be switched on and positioned next to the base station before registration can commence.
Repeating registration You can reregister the Gigaset Repeater at any time, for example if initial registration was unsuccessful, or if the Gigaset Repeater is to be registered at another base station for the first time. Before registering the Gigaset Repeater once again (e.g. at a different base station), please...
LED remains on constantly after the device has been switched on. If the left LED flashes, the Gigaset Repeater is too far away from the base station or recep- tion is being hindered by thick walls or metal objects for example (e.g. radiators).
The verification tone enables you to establish whether or not the handset is working in the extended area of the Gigaset Repeater. This tone is audible on the activated handset as long as the unit is connected to the Gigaset Repeater.
In the case of new devices and their components exhibiting defects resulting from ma- ● nufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
This Guarantee shall apply to new devices purchased in the European Union. For Pro- ● ducts sold in the Republic of Ireland the Guarantee is issued by Siemens Ireland Li- mited, Ballymoss Road, Sandyford Industrial Estate, Dublin 18 – The Republic of Ireland.
The duration of the Guarantee shall not be extended by services rendered under the ● terms of the Guarantee. Insofar as no Guarantee default exists, Siemens reserves the right to charge the custo- ● mer for replacement or repair. The above provisions does not imply a change in the burden of proof to the detriment ●...
You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.siemens.com/customercare. If the device needs to be repaired, please contact one of our Customer Care Centers: Abu Dhabi.
Customer Care Authorisation Your Gigaset is intended for operation in your country, as depicted on the underside of the base station and the packaging. The CE mark certifies conformity of the device with the essential requirements of the R&TTE directive. Excerpt from the original declaration: „Hereby the manufacturer declares, that the above mentioned product is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH...