Siemens Gigaset SE365 WLAN Operating Instructions Manual page 24

Please note:
If the DHCP server in your Gigaset SE365 WLAN has been activated (factory setting),
it may take a while after connecting to your PC until your PC is automatically assigned
an IP address and you can access the configuration program.
ì
The factory settings password is admin. Enter the password and click OK.
Please note:
For security reasons you should change the password at a later stage (see
page 36).
A screen with security information is displayed.
For the initial configuration you can skip this information. If you carry out all the basic
and security settings using the wizard as described below, then your device and network
are fully protected. If not, the next time you log on you will be informed of security gaps
in the configuration program.
ì
Click OK.
You will now see the start screen.
The user interface
21