Administration; System Password - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Administration

The Gigaset SE365 WLAN user interface includes several helpful functions for adminis-
tration. You can
u
change the system password (see page 61),
u
save and, if necessary, restore configuration data (see page 62),
u
reset the Gigaset SE365 WLAN to the factory settings (see page 63),
u
restart the device (see page 64),
u
update the firmware (see page 64),
u
view information about the configuration and status of the Gigaset SE365 WLAN
(see page 67).

System Password

You can assign a System Password for the configuration environment of your Gigaset
SE365 WLAN and specify the period after which a session is to end automatically if no
further entry is made.
Note:
Only one connection to the configuration environment can be started at any one
time.
ì
In the Administration menu, select System Password.
Following installation, the Gigaset SE365 WLAN configuration is protected by the
system password admin. To prevent unauthorised changes to the configuration, you
should change the system password. You may have already set a system password when
setting up the Security Setup Wizard. If so, you can change it here.
ì
Enter the current system password in the Current password field.
ì
Enter a new password in the New password field and repeat it in the
Confirm new password field.
Administration
61