Siemens Gigaset SE365 WLAN Operating Instructions Manual page 17

First Steps
Element Description
Reset The reset button is located behind the small opening.
Press the button for at least 2 seconds to restart the device.
Press the button for at least 5 seconds to return all settings to the
factory settings.
Warning: Restoring the factory settings will clear all the configuration
settings you made at initial startup. This also applies to the data gener-
ated by WPS for the wireless network (SSID and pre-shared key).
Updated firmware will not be affected.
Please note:
The reset button does not function while the device is rebooting. To
trigger the reset function, please wait until the WLAN LED has stopped
flashing.
LAN Socket for an Ethernet cable.
Mode Button to change the operating mode. The current operating mode is
indicated by the LEDs on the front panel.
Press the button for at least 2 seconds to switch to the next operating
mode.
Please note:
The Gigaset SE365 WLAN can be used as an access point. However, if it is configured
as a repeater or Ethernet adapter and the term access point is used in this context in
this user guide, a different device, such as a Router Gigaset SE366 WLAN or another
Gigaset SE365 WLAN configured as an access point is intended.
14