Local Network Settings - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Local network settings

In the next step, you will see the screen for the basic settings of your local network.
Defining the private IP address for the Gigaset SE365 WLAN
On this screen you can change the device's
192.168.2.254. It is the address under which the device can be reached in the local net-
work. The address can be freely assigned from the block of available addresses.
ì
If you want to assign the Gigaset SE365 WLAN a different IP address, enter it in the
fields next to IP address.
ì
Enter the Subnet mask which is used in your network.
We recommend using an address from a block that is reserved for private use. This
address block is 192.168.1.1 – 192.168.255.254.
Note:
New settings only take effect after rebooting the Gigaset SE365 WLAN. If neces-
sary, reconfigure the IP address on your PC (including one that is statically
assigned) so that it matches the new configuration.
IP address. The default IP address is
Basic Setup Wizard
29