Setting Up The Gigaset Se365 Wlan; Instructions For Use - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Setting up the Gigaset SE365 WLAN

The Gigaset SE365 WLAN can be set up in any suitable location in the home or office.
You do not need any special wiring. However, you should comply with the following
guidelines:
u
Place the device away from heat sources, direct sunlight and other electrical devices.
u
Do not place the device on a heat-sensitive surface.
u
Do not place objects on the device. Ensure that all air openings for air circulation are
not blocked.
u
Lay the cables so that nobody can trip over them.
u
Position the device on a non-slip surface.
u
A suitable socket as well as a connection to the Ethernet interface of a PC or a wired
network must be available in the place where you set up the Gigaset SE365 WLAN.
u
Do not position the device in the immediate vicinity of stereo equipment, TV sets or
microwave ovens. This may cause interference.
u
For wall mounting: Make sure not to damage any pipes or cables in the wall when
drilling the dowel holes.

Instructions for use

u
Never open or repair the device or mains adapter. For reasons of electrical safety it
may only be opened by authorised service technicians.
u
Never touch the pin and socket contacts with sharp or metallic objects.
u
Do not touch the mains adapters with wet hands.
u
Use an antistatic cloth to clean the device. Cleaning agents or solvents are not
suitable
.
First Steps
15