Wireless Network; Device - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Wireless Network

You will find information about the settings for your wireless network in the Status
menu on the Wireless Network screen.
u
SSID
Shows the identification of your wireless network.
u
Channel
Shows the radio channel currently used for transmitting data within your wireless
network.
u
MAC address
Shows the local MAC address of your device for wireless data transmission.
u
WDS links
Only displayed in Repeater and Access point operating mode.
Shows the current number of connections to other access point or repeaters in your
wireless network.
ì
Click Refresh to refresh this screen and update the displayed data.

Device

You will find information about the most important data for your device in the Status
menu on the Device screen.
u
System uptime
Shows your device's operating time since the last time the system was started.
u
Operating Mode
Shows the currently set operating mode of the device.
u
Firmware version
Shows the version of the firmware currently installed in your device.
u
Bootcode version
Shows the version of the boot code currently installed in your device.
u
Wireless driver version
Shows the version of the WLAN driver currently installed in your device.
u
User interface version
Shows the version of the user interface currently installed in your device.
u
Hardware version
Shows the version of your device's hardware.
Status information
69