Saving And Restoring A Configuration - Siemens Gigaset SE365 WLAN Operating Instructions Manual

Administration
The password may contain up to 20 characters. The password is case sensitive. Avoid
proper names and words that are too obvious. Use a combination of letters, numbers
and special characters.
Please note:
If you ever forget your system password, you will have to reset your Gigaset SE365
WLAN (see page 14). Please bear in mind that this will restore all the settings to the
factory configuration. The password is reset to the default setting admin.
Setting Idle time before log off:
ì
Enter the period in minutes after which the configuration program is to be aborted
if no entry is made. The default setting is 10 minutes. If you enter the value 0, the
program will never be aborted automatically.
ì
Click OK to apply the settings.

Saving and restoring a configuration

Once you have configured your Gigaset SE365 WLAN, it is advisable to back up the set-
tings. You can then restore them at any time, should they be accidentally deleted or
overwritten.
You can also reset the configuration to the factory settings. You should always do this
before passing your device on to any other person.
u
In the Administration menu, select Save & Restore.
62